Asphalt Plants

 Hot Mix Drag Elevators
(Optional: Self-Erecting)

Scroll down for specifications.

   Frame:

The frame is to be fabricated from heavy duty formed plate. The sides of the conveyor are lined with thick wear plate. The sub floor is fabricated from heavy duty plate continuously welded in place. The drag floor is to be provided with thick wear plate which are bolted to the sub floor.

  Head Sprocket:

The head sprocket is to be segmental type, flame hardened teeth, for easy replacement, with 3-7/16" - 5-5/16" shaft sizes.

  Tail Sprocket:

The tail sprocket is to be segmental type, flame hardened teeth, for easy replacement, with 3-7/16" - 3-15-16" shaft sizes. Includes tail shaft take-up assembly for adjusting chain tension.

  Drive Assembly:

The conveyor is to be driven by a TEFC 1750 RPM electric motor and shaft mount speed reducer. The motor is connected to the reducer input by belts and pulleys. The shaft is mounted on heavy duty spherical roller bearings.

  Conveyor Chain:

The conveyor chain is a roller chain with wear resistant components. Chain(s) may be either single or dual strand.

  Return Rollers:

Rollers are to be fabricated from water resistant steel, spaced 6-7 feet apart, and supported on heavy duty shafts with flange block bearings.

  Stairway:

The stairway is to be located on the left hand side of the conveyor, supported on channel members.

  Running Gear:

The running gear is to be 5" diameter axle, with 10 stud wheels and 11 x 22.5 tires, with goose neck, standard king pin, air brakes, spring suspension, mud flaps and tail lighting.

BDM Engineering, Inc.... Asphalt Plants, Drum Mix Plants, Baghouses, Cold Feed Bins, Hot Mix Silos, Hot Mix Drag Elevators, Hot Mix Bucket Elevators, Control Houses.